Availability

Airbyte Cloud Airbyte OSS

Support Level

Community

Latest Version

0.2.0

MySQL

There are two flavors of connectors for this destination:

1. destination-mysql connector. Supports both SSL and non SSL connections.
2. destination-mysql-strict-encrypt connector. Pretty same as connector above, but supports SSL connections only.

Features

Feature	Supported?(Yes/No)	Notes
Full Refresh Sync	Yes
Incremental - Append Sync	Yes
Incremental - Append + Deduped	No
Namespaces	Yes
SSH Tunnel Connection	Yes

Output Schema

Each stream will be output into its own table in MySQL. Each table will contain 3 columns:

• _airbyte_ab_id: a uuid assigned by Airbyte to each event that is processed. The column type in MySQL is VARCHAR(256).
• _airbyte_emitted_at: a timestamp representing when the event was pulled from the data source. The column type in MySQL is TIMESTAMP(6).
• _airbyte_data: a json blob representing with the event data. The column type in MySQL is JSON.

Getting Started (Airbyte Cloud)

Airbyte Cloud only supports connecting to your MySQL instance with TLS encryption. Other than that, you can proceed with the open-source instructions below.

Getting Started (Airbyte Open Source)

Requirements

To use the MySQL destination, you'll need:

• To sync data to MySQL with normalization MySQL database 8.0.0 or above
• To sync data to MySQL without normalization you'll need MySQL 5.0 or above.

Troubleshooting

Some users reported that they could not connect to Amazon RDS MySQL or MariaDB. This can be diagnosed with the error message: Cannot create a PoolableConnectionFactory. To solve this issue add enabledTLSProtocols=TLSv1.2 in the JDBC parameters.

Network Access

Make sure your MySQL database can be accessed by Airbyte. If your database is within a VPC, you may need to allow access from the IP you're using to expose Airbyte.

Permissions

You need a MySQL user with CREATE, INSERT, SELECT, DROP permissions. We highly recommend creating an Airbyte-specific user for this purpose.

Target Database

MySQL doesn't differentiate between a database and schema. A database is essentially a schema where all the tables live in. You will need to choose an existing database or create a new database. This will act as a default database/schema where the tables will be created if the source doesn't provide a namespace.

Setup the MySQL destination in Airbyte

Before setting up MySQL destination in Airbyte, you need to set the local_infile system variable to true. You can do this by running the query SET GLOBAL local_infile = true with a user with SYSTEM_VARIABLES_ADMIN permission. This is required cause Airbyte uses LOAD DATA LOCAL INFILE to load data into table.

You should now have all the requirements needed to configure MySQL as a destination in the UI. You'll need the following information to configure the MySQL destination:

• Host
• Port
• Username
• Password
• Database
• jdbc_url_params (Optional)

Default JDBC URL Parameters

The following JDBC URL parameters are set by Airbyte and cannot be overridden by the jdbc_url_params field:

• useSSL=true (unless ssl is set to false)
• requireSSL=true (unless ssl is set to false)
• verifyServerCertificate=false (unless ssl is set to false)
• zeroDateTimeBehavior=convertToNull

Known Limitations

Note that MySQL documentation discusses identifiers case sensitivity using the lower_case_table_names system variable. One of their recommendations is:

"It is best to adopt a consistent convention, such as always creating and referring to databases and tables using lowercase names.
 This convention is recommended for maximum portability and ease of use."

Source: MySQL docs

As a result, Airbyte MySQL destination forces all identifier (table, schema and columns) names to be lowercase.

Connection via SSH Tunnel

Airbyte has the ability to connect to a MySQl instance via an SSH Tunnel. The reason you might want to do this because it is not possible (or against security policy) to connect to the database directly (e.g. it does not have a public IP address).

When using an SSH tunnel, you are configuring Airbyte to connect to an intermediate server (a.k.a. a bastion sever) that does have direct access to the database. Airbyte connects to the bastion and then asks the bastion to connect directly to the server.

Using this feature requires additional configuration, when creating the destination. We will talk through what each piece of configuration means.

1. Configure all fields for the destination as you normally would, except SSH Tunnel Method.

2. SSH Tunnel Method defaults to No Tunnel (meaning a direct connection). If you want to use an SSH Tunnel choose SSH Key Authentication or Password Authentication.

   1. Choose Key Authentication if you will be using an RSA private key as your secret for establishing the SSH Tunnel (see below for more information on generating this key).
   2. Choose Password Authentication if you will be using a password as your secret for establishing the SSH Tunnel.
   danger

   Since Airbyte Cloud requires encrypted communication, select SSH Key Authentication or Password Authentication if you selected preferred as the SSL Mode; otherwise, the connection will fail.

3. SSH Tunnel Jump Server Host refers to the intermediate (bastion) server that Airbyte will connect to. This should be a hostname or an IP Address.

4. SSH Connection Port is the port on the bastion server with which to make the SSH connection. The default port for SSH connections is 22, so unless you have explicitly changed something, go with the default.

5. SSH Login Username is the username that Airbyte should use when connection to the bastion server. This is NOT the MySQl username.

6. If you are using Password Authentication, then SSH Login Username should be set to the password of the User from the previous step. If you are using SSH Key Authentication leave this blank. Again, this is not the MySQl password, but the password for the OS-user that Airbyte is using to perform commands on the bastion.

7. If you are using SSH Key Authentication, then SSH Private Key should be set to the RSA Private Key that you are using to create the SSH connection. This should be the full contents of the key file starting with -----BEGIN RSA PRIVATE KEY----- and ending with -----END RSA PRIVATE KEY-----.

CHANGELOG

Version	Date	Pull Request	Subject
0.2.0	2023-06-27	27781	License Update: Elv2
0.1.21	2022-09-14	15668	Wrap logs in AirbyteLogMessage
0.1.20	2022-06-17	13864	Updated stacktrace format for any trace message errors
0.1.19	2022-05-17	12820	Improved 'check' operation performance
0.1.18	2022-02-25	10421	Refactor JDBC parameters handling
0.1.17	2022-02-16	10362	Add jdbc_url_params support for optional JDBC parameters
0.1.16	2022-02-14	10256	Add -XX:+ExitOnOutOfMemoryError JVM option
0.1.15	2021-12-01	8371	Fixed incorrect handling "\n" in ssh key
0.1.14	2021-11-08	#7719	Improve handling of wide rows by buffering records based on their byte size rather than their count
0.1.13	2021-09-28	#6506	Added support for MySQL destination via TLS/SSL
0.1.12	2021-09-24	#6317	Added option to connect to DB via SSH
0.1.11	2021-07-30	#5125	Enable additionalPropertities in spec.json
0.1.10	2021-07-28	#5026	Add sanitized json fields in raw tables to handle quotes in column names
0.1.7	2021-07-09	#4651	Switch normalization flag on so users can use normalization.
0.1.6	2021-07-03	#4531	Added normalization for MySQL.
0.1.5	2021-07-03	#3973	Added AIRBYTE_ENTRYPOINT for kubernetes support.
0.1.4	2021-07-03	#3290	Switched to get states from destination instead of source.
0.1.3	2021-07-03	#3387	Fixed a bug for message length checking.
0.1.2	2021-07-03	#3327	Fixed LSEP unicode characters.
0.1.1	2021-07-03	#3289	Added support for outputting messages.
0.1.0	2021-05-06	#3242	Added MySQL destination.